The ZP516 board is an M.2 Key-M NVMe SSD PIP PCIe Peripheral Board designed for the Raspberry Pi 5 that uses the new PCIE interface of the Raspberry Pi 5 to utilize the M.2 NVME SSDs for ultra-fast booting and fast data transmission.
Supports auxiliary power supply, newly added 2.54mm 2Pin, 1.25mm 4Pin, and Type-C port to provide extra power during large data transfer, avoiding the problem of insufficient power supply for ultra-large capacity of SSDs.
ZP516 M.2 NVMe to PCIe Adapter Board supports the installation of M.2 KEY-M NVMe SSD in 2280 length (SSD is not included). The ZP516 hardware has no limit on NVMe SSD capacity, which depends on the Raspberry Pi OS.
SSD Boot System: Support for booting system, storage and expansion from NVME SSD. It also supports for booting system from TF while storage and expansion from NVME SSD.
Great Accessories for Raspberry Pi 5: ZP516 PCIe Peripheral Board is only compatible with Raspberry Pi 5 8GB / 4GB computer (NOT include Raspberry Pi 5).
Wiring Methods of Auxiliary Power Supply:
Through the 2.54mm 2Pin connector, connect to the 40pin GPIO of Raspberry Pi 5. It can also connect to external power supply.
Through the USB connector, connect USB-C port or 1.25mm 4Pin connector of the board to the USB port of Raspberry Pi 5. It can also connect to external power supply.
Packing List:
1 x ZP516 PCIe to M.2 NVMe SSD Adapter Board
4 x M2.5x17mm Spacers
8 x M2.5x4mm Screws
1 x M2x2.5mm Screws (to fix SSD)
1 x PCIe FFC cable
Note: The Raspberry Pi 5 and M.2 NVMe SSD is not included in the packing list.
