The ZP513 board is an M.2 Key-M NVMe SSD PIP PCIe Peripheral Board for the Raspberry Pi 5 that uses the new PCIE interface of the Raspberry Pi 5 to utilize the M.2 NVME SSDs for ultra-fast booting and fast data transmission.
ZDE ZP513 M.2 NVMe to PCIe Adapter Board is designed for the latest Raspberry Pi 5, which supports the installation of M.2 KEY-M NVMe SSD in 2230/2242 length.
Equipped with PWR LED Indicator and ACT Status LED Indicator, practical design for real-time monitoring of the working status.
Supports installation of official active coolers for heat dissipation.
How to Power: Power the ZP513 shield directly from the FFC PCIe ribbon.
The ZP513 hardware has no limit on NVMe SSD capacity, which depends on the Raspberry Pi OS.
We don’t recommend to use NVMe SSD drives which is equipped with a Phison controller due to their proven incompatibility.
New NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.
Packing List:
1 x ZP513 PCIe to M.2 NVMe SSD Adapter Board
4 x M2.5x17mm Spacers
8 x M2.5x4mm Screws
2 x M2x2.5mm Screws (to fix SSD)
1 x 4mm Pillar (to fix SSD)
1 x PCIe FFC cable
Note: The Raspberry Pi 5 and M.2 NVMe SSD is not included in the packing list.
